If your washing gets to the end of each cycle but refuses to spin, it could be down to something as simple as overloading your machine, causing it to become unbalanced. If you've jammed in too many heavy towels, for example, the weight can affect the sensors and shut off the machine. Re-balance the load and try again. Many modern machines have the likes of a 40˚C cotton wash indicated on the panel but that’s not actually what it is. What it is really is a program that the manufacturer has deemed to be an equivalent program for that HLCC wash code that satisfies the requirement of that wash label. This replacement heater also includes the NTC a resistor that changes its electrical resistance at varying temperatures. A NTC is used in the washing machine as a thermostat or temperature sensitive safety cut out device. If the NTC has gone faulty it could cause the machine to not give any temperature readings or give incorrect ones. If it no longer registers any temperature change the washing machine could overheat. That doesn’t mean that hot, humid conditions can’t cause the same problems. You need to think of your washing machine as a tender plant that has to be kept in just the right temperate zone to thrive. When Does The Fuse Trip? In this video I will be showing you how to use a megger or insulation tester to help identify problems in a domestic appliance.

Plus, the water is only hot for a short period so you may end up missing it depending on your machine’s cycle. If it's clear, then you might need to give the machine a good clean. Mould, built-up grime and detergent can all contribute to bad smells. If your washing machine has a leak, it is likely to trip the fuse, RCD or breaker at some point. If this happens, you could dismantle the machine and look for water traces or call in an expert. Clues To What Part Is Faulty If you think your washer is creating a commotion, follow these easy steps on How to fix a loud washing machine.

If it's not a problem with overloading, it could be one of these issues giving you a washing machine that won't spin: The important thing to understand here and the point is that, if the heater is faulty the machine cannot heat and it will in some way abort the program. If your washing machine is struggling to heat water, or is heating the water erratically, then there may be a problem with the heating element.

Another possible culprit could be the water inlet valve. This electronic valve controls the filling of the water. If the valve is faulty and doesn't close during each cycle once the water is at the appropriate level, it will overfill. Washing machine noise problems Why is my washing machine so noisy? Most problems with detergent drawers can be fixed by giving them a good clean, and manufacturers recommend you do this regularly anyway. If your detergent drawer is actually broken, replacements can be bought from the manufacturer. Understanding what is causing the fuse to trip is a big part in how to fix your washing machine. So the engineer will need to know exactly when the machine causes the RCD, breaker or fuse to trip. Fuse Trips As Soon As The Machine Is Turned OnDoor damage – If the door, handle or latch has any damage this could cause the machine to cease opening. Inspect your door before calling out the repair man. There is also a tube attached to the switch. If this has come away from the switch the machine could also risk overfilling. You can also take a look at our guide to domestic appliance repairs to find out the average costs for a range of jobs, as quoted by Which? Trusted Traders from their years of experience.