It’s horrible advice – almost as bad as recommending that someone fixes their flat tire with duct tape. There is some veracity to the old hack of using toothpaste to fix scratches as it contains lightly abrasive particles like many cutting compounds. In many cases having paintwork restoration work performed by professionals seems excessively expensive. Direct sunlight could make the metal on the car hot, which isn’t optimal for applying touch up paint.

remove scratches from your paintwork | RAC Drive How to remove scratches from your paintwork | RAC Drive

Fixing scratches and chips should be a common job for many motorists, but many choose to leave it to the professionals or just not bother to fix them at all. You can see that there are significantly fewer scratches on the door and that the remaining scratches are less noticeable. If the scratch is deeper, or you’d rather entrust the job to the professionals, you might prefer to check your vehicle into a local garage. Wash and dry the affected area to ensure that you don’t end up rubbing any debris or dirt into the scratch and making it worse.Check the area to see if the scratches are still visible and then repeat the process 1 or 2 more times if needed. There are three layers of paintwork on your car: clear coat, base coat, primer and beneath these is the metal body panel.

Car Scratch Removers for 2023, Tested - Car and Driver Best Car Scratch Removers for 2023, Tested - Car and Driver

Carefully apply a coat of primer if there are any bare sections of metal, and then apply the first coat of paint once the primer dries. And because it is so useful and easily available, it won’t be logical for you to avoid it altogether. Equally, you do not want to trap any moisture in the scratch either, which can actually compromise the coating, therefore it is important to ensure that following cleaning the scratch is allowed to dry naturally.They often include fibreglass pen tips for removing any rust or loose paint, and can then fill in the scratch with paint matched to the rest of the car to hide a blemish completely. With each product, we performed three 30-second passes over the respective section and noted the results.