Altitude hold: The Motion Drone has a nifty feature where it automatically holds its height for you. That means you can focus on flying it where you want it to go without the worry of going too high and out of range, or too low and hitting the floor! Trimming is a critical part of flying a drone so always read your instructions to find out where the controls are to do this! Menkind Super Tip No. 4: The drone doesn't have to be up in the air flying to adjust the trim. As long as the controller is still connected to the drone (synced) then you can adjust the trim settings. This is really handy to know if the drone needs a lot of trimming. Simply land the drone, make your adjustments, then take off again to see if it's more stable. Rinse and repeat until you are happy you have the control. Connect the USB-C port of the goggles to your mobile device, open the DJI Fly app, and follow the prompts to activate. In the video below, [Paweł] takes the motion controller for a test flight and comes away largely satisfied with the results. Some tweaks are in the works as you might expect for a first attempt, but nothing that would prevent you from building your own version today and experiencing what might be the next evolution of RC flying.

Headless mode:Thismeans that it doesn't matter which way the drone is facing; it will still follow the command of your hand movement. TIP: If there is an emergency while returning to the Home Point, press the Brake button once to cancel RTH.

This item is sold and dispatched by a Range Plus Partner

Flight and direction:As for flight, simply move your hand left or right and watch the drone mimic your movement. A simple tilt forward makes the drone fly ahead. The USB-C port at the bottom of the Motion Controller can be used to charge the device and connect to a computer for firmware updates. In 810p/120fps Low-Latency mode, the video transmission latency is lower than 28ms; in 810p/60fps High-Quality mode, the video transmission latency is lower than 40ms. degree flips:To do this, all you have to do is simply push the trigger on the side and the drone does the rest for you.

Wise man once say, "to fly a drone, you must hover before you can fly." It's probably going to take you a few attempts just to get the drone off the ground, but these next tips should help. Take off:To make the drone take off, all you need to do is press the button on the side of the remote gadget! Let’s face it, there haven’t been any properly-recorded UFO crashes in history, so they must be pretty easy to fly. That, or they're full of awesome technology that helps keep them in the air! We’re not sure, because we’ve never asked an alien. But, we can confirm that this Earth-made RED5 Motion Control UFO is both easy to fly and loaded with out-of-this-world tech!For more details about the Motion Controller, read our DJI FPV Combo hands-on review or buy it here. Altitude hold: The Motion Drone has a nifty feature where it automatically holds its height for you. That means you can focus on flying it where you want it to go without the worry of going too high and out of range, or too low and hitting the floor! If your command has worked, the drone lights should no longer flash and you should have heard a satisfying beep! You've just synced!