You will need to use a 3.5mm terminating ModMic, such as the ModMic Uni and one or more adapters as follows: We once again see the same frequency selection, and just like the low shelf filter, we’re going to set this to corner and this time to a much higher number. We suggest starting with a value of 3,000hz. This gives you a nice gradual increase from the upper mid-range. Typical reasonable ranges for this kind of filter would be from ~2,000hz all the way up to 5,000hz.

The ModMic is totally flexible, almost any sensible form may be bent. However, prevent the boom from bending to the tip of the microphone, since it could loose the housing. How can I connect wireless with ModMic? Serious production microphone: get a professional condenser microphone or an XLR setup with a dynamic XLR microphone with a single cardioid polar pattern, XLR cable, and other necessary equipment. Do it like the pros.

The Solution: Unfortunately this is a hardware limitation of the Apple products, they do not provide the required 5v phantom power the ModMic needs to operate. Fortunately this is also a very easy fix, all you will need is a USB adapter like the one above. The Antlion USB Adapter is compatible with both Mac and PC so you can move it from machine to machine. Using the ModMic with Consoles: The good news is that it’s somewhat permanent. The ModMic is actually two pieces. The larger piece is the mic itself, along with the boom arm. But the part that’s actually affixed to your headphones is just a small disc, about the size of a dime. The microphone attaches magnetically to the disc, so you’re free to remove the bulk whenever you’d like. All that’s left over is the weird magnetic rivet on the outside (as seen in the image below). IDG / Hayden Dingman We talked about the two aforementioned models but now let’s look at the alternatives you see as a customer. There are a few modmic alternatives and boompro alternatives in the market. Some of the best are discussed below. The ModMic Wireless microphone has a battery life of 12 hours or more. Although they canlast fora long time, theywill eventually run out if the device is not charged. 3. Is a ModMic worth it? Currently, there is no direct wireless microphone alternative to most wireless ModMic. This is because most wireless ModMics are specifically made to work with one type of device. However, several headphones come with a wireless microphone.

The ModMic Wireless is always available for gaming, work, and everything in between, with a 12-hour battery and the ability to charge while in use through the supplied micro USB cord. ProsThe Problem: Hit record on any program you want, but say nothing. Then hit play. Hear anything? A hum, buzz, or hiss? This is white noise. Don't hear anything? Crank the volume to max and hit play again. Nearly every system has a little bit of this, but the important part is to minimize it as much as possible. Pricing is always the elephant in the room. A product can be greater than sliced bread, but it always comes down to how much does it cost? After all, there is a relationship between cost and benefit. Well, here’s the 411 on the ModMic pricing:

For “difficult” surfaces such as open mesh designs, 3M recommends warming the adhesive, pressing it to the surface for 30 seconds, then letting it cure for at least an hour before regular use.

What about the Battery 

W've split our choices down into mics for specfic needs, be it the best for recording voiceovers, or the best for streaming. We've also broken XLR microphones off into their own separate categories, given these are a little more technical than plug-and-play USB choices but can offer a substantial boost in quality and flexibility.

Your headphones will in no way be harmed by magnets. The glue is an adhesive 3M brand compound that must not harm or leave residues on hard surfaces. Can I bend the microwave? Yes, ModMic is worth it and is trusted by many. When we talk about a microphone’s quality, the ModMic Wireless exceeds most wired gaming headsets. The ModMic Wireless, unlike other Bluetooth microphones, does not compress the sound. It’s also a sensitive mic, so your speech comes through loud and clear. 4. Can too much gain damage a mic? For XLR mics, you'll also need an audio interface and an XLR male to female cable to hook up your microphone. This product is able to be connected to any headphones and when attached, it gives those headphones microphone sound quality it cannot provide on its own. This is particularly useful when you’re on important business phone calls, or video meetings where being heard clearly is highly important.

Therefore, you will not be able to use the wireless microphone unless you bought it alongside the Logitech G733 headset or bought it as a replacement. The short and simple answer to this question is yes, it is easy to get set up and working. Here’s what you need to do: