As with other kinds of cable, USB cable quality can vary. We have also been made aware of rare quality issues with selected USB ports on a laptop series. Passive cables and adapters do not have such a conversion chip built in. Instead they rely on the source to do the conversion. Unless the source has the ability to output analogue over DisplayPort or HDMI then an active adapter is required for VGA output. Enable “Screen Recording” to allow the DisplayLink Manager app to capture pixels and send them to your USB peripheral: At first it was not working. Screen was recognized both in Windows and in the AMD software as second monitor, but still no signal.

The available resolutions through the OS display configuration will be restricted to those supported by the display. If the display does not report the maximum resolution as supported, it will not be available to the user to select. are not supported by your DisplayLink device. T he table below documents the maximum supported resolution of DisplayLink ICs on various interfaces. ASIC Family It really seems like there is a software/driver bug of some kind. But unfortunately I have no good clue on how to find it. If you are using a DisplayPort to HDMI, DisplayPort to DVI, DisplayPort to VGA or HDMI to VGA cable and are having issues we recommend using an active video adapter in conjunction with a video cable as illustrated below: I have a problem with myHP Elitebook 745 G6 with AMD Chipset (AMD Ryzen 5 PRO 3500U w/Radeon Vega Mobile Gfx.)

HP USB-C/A Universal Dock G2

it appears, if there are any errors against it?Please note any errors and report to DisplayLink Support Select the 'DisplayLink Software Installer' to begin installation of the DisplayLink driver on your Mac.

Note that your laptop or tablet display will be re-enabled when the DisplayLink display is disconnected. Using the Windows Display interface

There have been some instances of DisplayLink devices with a yellow "!" in device manager, and opening the properties shows that they have an error code 43. This is usually due to a driver fault. To fix this error we recommend trying the following steps:

Ensure the computer power settings are set to "High Performance" including the GPU settings to Maximum

8. Disable USB selective suspend

Jumbo frames are not supported on DL-3xxx, DL-5xxx or DL-6xxx series Ethernet ports. Disable jumbo frames on any network with DisplayLink Ethernet ports connected, otherwise problems could be found with network behaviour. DisplayLink Manager app will introduce new elements/features like a graphical user interface shown in section 4.4. In 1.6.0 version of DisplayLink Manager application will display this message in the Home tab when working with macOS Monterey. Using "Open Notification & Focus" hyperlink you will be taken directly to "Notification & Focus" setting in "System Preferences". IMPORTANT: Make sure your Ubuntu distibution is up to date by running sudo apt-get update and then sudo apt-get dist-upgrade from a Terminal. If the distribution is not up to date, you may find issues with blank or corrupted USB displays. As the DisplayLink Manager app does not rely on macOS kernel extensions, it is not only easier to install, but it will also lead to increased stability/reliability, improved behaviour across OS upgrades, and seamless updates through the App Store.

does not store or record any screen content. If you enabled notifications from DisplayLink Manager, itIf using the DL-3900 or DL-5900, which supports dual outputs, resolutions above 2048x1152 will be unavailable if a second display is connected. If wanting to use the DL-3900 with resolutions above 2048x1152, disconnect the second display. DisplayLink host software reads the supported modes from the display. Only resolutions reported by the monitor will be offered through the The arrangement of the displays can be changed by dragging the screens to the correct position, to reflect the physical positions of the displays on your desk. I have previously been able to connect my Acer H277HK 4K(UHD) monitor as secondary monitor via the HDMI connection on the laptop. This used to work, although i always had to turn GPU scaling off and then on again for it to work.