VB-CABLE is a Donationware! All participations are welcome. Get your license for VB-CABLE-Windows or VB-CABLE-MAC directly on our webshop. The 28/128 button does nothing when pressed. This is sometimes labeled 14/28 on some older throttles. Custom graphics, such as the bell, whistle, and superscript numbers are not displayed. The NCE wireless system does not support custom graphics when operating in wireless mode. Normally, when the Horn/Whistle button is pressed, the appropriately assigned function status is changed to active on the LCD for the duration during which the Horn/Whistle button is held down. Because the NCE wireless system provides less communications bandwidth than when running wired, this feature is disabled in wireless mode. This helps to improve overall performance.

boAt AUX 500 - 3.5mm Audio AUX male to male Cable with

Fully supported. AIU inputs trigger LCC Events. These can be linked to additional logic, including through the use of macros stored in the CS-105.The following example shows a greater than four digit locomotive name on the first row while the second row shows R for reverse, 035 for speed, and functions L, 9, 10, 15, 19, 20, and 28 turned on respectively. Note the superscript '1' and '2' numbers. When present, these denote which decade of functions is being shown. Because custom superscript graphics are not supported in wireless mode, they are not used when operating in wireless mode. When pressed, the red Emergency Stop button activates the global locomotive E-Stop. ProCab TM style throttles will blink the text "E-STOP" in the upper right hand corner of the display. Any throttle can resume normal operations by pressing the red Emergency Stop button again.

VB-Audio Virtual Apps

VB-Audio CABLE C & D are two other Audio Drivers working as two independent Virtual Audio Cable to connect more applications together (for Windows or macOS). The EXPN button on a ProCab TM is reserved for wireless setup. The EXPN button will not work as described in the section(s) below. To use the EXPN button as described below, on a wireless cab, plug the cab in such that it is not using wireless. VB-CABLE is a virtual audio device working as virtual audio cable. All audio coming in the CABLE input Enables Cab Bus but with limitations designed for expanded compatibility with some older Cab Bus devices. Disables some advanced features such as custom character graphics.The screen layout for ProCab TM support has been designed to closely match that of the original system(s). The general positioning of things such as the loco number, speed, direction, and active functions remain largely unchanged, while at the same time being enhanced to offer more information. The NCE wireless system is fully supported. Because of some intrinsic properties of the NCE wireless system, the behavior of throttles operating while wireless will differ as follows: The scrolling list search entry can be particularly useful when trying to use locomotive protocols that are not DCC or Märklin-Motorola. A direct wireless equipped locomotive designed to natively use the LCC protocol is one such example. Up and down arrows indicate which direction(s) the list can be scrolled. Because custom graphics are not supported in wireless mode, a '.' is used in their place for the up and down arrows when operating in wireless mode. The NCE Auxiliary Input Unit (AIU01) is fully supported. This device provides 14 binary state inputs. Whenever an input changes state, the CS-105 will send a corresponding LCC Event ID. The Event IDs produced are fixed and use the following pattern: HIFI CABLE is working like VB-CABLE except it needs to be configured with the same samplerate on its Input and Its output. HI-FI Cable is bit perfect and supports up to 24 bits 384 kHz audio stream.