The access point is connected via a Cat6 cable to a router. Both the router and the AP tells me that the wire connection is 1000 Mbps.

UniFi AP AC-LR – Ubiquiti Networks UniFi AP AC-LR – Ubiquiti Networks

There are no Ethernet ports, so it cannot be wired, or provide a bridged connection to another wired device. LED is blinking:this is not a configured state, this may indicate that the device is not connected properly, or that something is wrong with the cable. How to Disable Device LEDs You can try lowering the transmit power in the radio settings of one of the access points. If the transmit power it to high then your device will stay connected too long to the access point. For now, UniFi is still a good way to create a high performance network. More Wi-Fi 6 models are coming. I have not heard any rumors or seen anything confirming Wi-Fi 6E capable APs are coming soon, but I will update my current UniFi access point guide when that happens.

Wall Mount

Yes, that is correct. USG isn’t needed for the Unifi access points. But the cloud key is recommended. It will work without it, you could also install the Unifi controller on your notebook just for the setup. Only keep in mind that you might need to lower the transmit power. Be default it’s on auto and that is not ideal. This article is very important especially to the first time users. I find the parting shot very interesting.. Where the author says you have to disable the wifi on the primary router.. With VLANs you are separating the network, so it’s normal that you can’t access the controller in the LAN network from a device in VLAN10. I don’t have a guide about setting up vLAN yet, I will work on that coming weeks.

UniFi AC AP Datasheet - Ubiquiti UniFi AC AP Datasheet - Ubiquiti

AC-Lite: The do-everything workhorse. Unless you are trying to push gigabit speeds or have some really heavy wireless needs in mind, this is a good default option. I made an updated version of this guide for 2022 and the Wi-Fi 6 UniFi AP models. The new version also has updated descriptions and advice. I will leave this old version up for now, but I’d recommend referring to the updated version going forward. Which UniFi Wireless Access Points You Should Buy For Your Network You can create a Ubiquiti Account at account.ui.com. This way you can manage your controller from everywhere via unifi.ui.com and use the same credentials locally.If you use an Unifi access point, then you can easily configure one SSID of all the access points. If you want to use another brand, then just enter the same SSID and WPA key on both devices. Only use a different channel of each access point.