Sports, documentaries, reality shows, and movies are among the most loved programmes on TV today. No matter how you plan to use your television, you’ll need to decide where and how to position it. Using a TV stand is by far the simplest option but depending on the size of your TV, these pieces of furniture can intrude into an already crowded living room. When mounted, there is a gap of just 13mm between screen and wall, making it clean and unobtrusive, plus its smart levelling system helps you to align your TV once installed so that you can straighten it later. A single GripIt fixing holds up to 113kg, more than any other on the market, eliminating the worry and restrictions about weight. What’s more, GripIt fixings can be installed directly onto the plasterboard, avoiding any damage or impact to the surface. Position your anchor where you would like to install your TV and use a pencil to indicate exactly how you want it to sit. If you’re working with someone, you could have them lift one side of the TV while you take the other. It’s very useful for getting a large flatscreen on the wall.

How to mount a tv on a plaster wall without studs

It’s a tilting mount, which offers fingertip adjustment and comes with the ability to slide the TV side-to-side for good wall positioning. This is a big help if you’ve had to place the mount off-centre to account for wall studs.If you’ve got a larger telly, the Sanus VLT5 has you covered, supporting TVs of between 51 and 80 inches and up to around 55kg. The One For All Ultra Slim WM6611 really lives up to its brand name, and supports screen sizes from a bedroom-friendly 32 inches, all the way up to a huge living room-dominating 84 inches, in a fixed design. This guide will look at how to wall mount a TV on a plaster wall without studs, the maximum TV weight for wall mounting and what to do if you have no stud finder. How to mount a tv on a plaster wall without studs The AVF Superior ACL224 secures TVs up to 40in and 20kg, swivelling through 180 degrees, extending to around 33cm and tilting up to 15 degrees.

TV on a Plaster Wall: 14 Steps (with Pictures) How to Hang a TV on a Plaster Wall: 14 Steps (with Pictures)

If the level is tilted in one direction, the bubble moves as well. For example, if it moves to the right, then the mount is sloping from right to left. Generally, the best option for you will depend on your circumstances. For example, using a ceiling mounting can be quite difficult physically, and mounting plates may not be the most aesthetically pleasing option. The most important thing to consider is to use a mounting that can properly support the weight of your TV. Usually, the heavier the TV, the stronger the mount will need to be. Choose a spot at eye level to mount the TV. Determine where you would like to hang the TV and which spots in the room offer the best viewing angle. Generally, the center of a 42 in (110 cm) TV should be mounted 56 in (140 cm) from the floor, and larger TVs can be mounted a little higher to keep them at eye level. Make sure the TV is visible from different angles. Also, keep in mind the location of nearby power outlets. [1] X Research source

The WALL 3345 can swivel your screen by 90 degrees to the left or right and up and down by 10 degrees each way. It’ll support TVs between 40 and 65 inches and weights up to 30kg, with a choice of 13 VESA patterns, from 100 x 100mm to 400 x 600mm. Option 3: Taking the plasterboard off the wall to fit timber supports inside the wall… well, this would have cost more than the TV itself. Larger televisions are usually also heavier so will put more pressure on your wall. As such there’s a few important considerations you’ll need to bear in mind. It all comes down to the size and type of mount you use. The larger your TV, the bigger and more secure the mount will need to be. How much weight can I hang on a plaster wall?