The ModMic Wireless should turn off on its own if the receiver is not powered (e.g. you turn off your PC) after several minutes.

ModMic is used by many of the best VR streamers, including VR Oasis, Ragesaq, CeCeVR, Scotchbox VR, Cas and Chary, The Lonely Viper and MANY more. They select ModMic as their VR microphone because no matter how they move, the mic stays in the same place relative to their mouth, providing consistent quality from every position.Lavalier microphone comes with a nifty carrying pouch, cleaning cloth, a TRRS to TRS adapter, Y cable, and extension cord. Just be aware that every time you add a wire, it might degrade the audio quality.

Sure, it does. However, before purchasing a new mic, you have to first try and squeeze as much out of your old mic as possible. It's no secret that the ModMic Wireless is the go-to mic for VR. However, some of you out there may be wondering how to set up the mic for streaming... First off, there are two versions of this ModMic available. You can get the ModMic as a USB wired device, or you can get it as a wireless Mic. Depending on your preference, and available budget, you have these choices. Two modes The Solution: Ensure the mixer has a 5v mode or 12v mode. If it's over 12v, do NOT use it without an official Antlion Audio Power Converter! If your device does have 5v or 12v phantom power you may be able to use a more simple XLR to 3.5mm Adapter (pictured below) Again I can not stress enough to NEVER plug the ModMic into full 24v or 48v phantom power, or you risk serious damage to your hardware.

Is the ModMic easy to install? 

The Solution: There is more than one way to get your ModMic working with your Playstation or Xbox, this is the easiest and most cost effective way. As you can see in the image below, with a Small “Y” adapter (Like this one) into the bottom of your controller, you can use both your headphones and your ModMic with your favorite console. This wired mic is unarguably one of the cheapest microphones you can get. The lavalier microphone delivers a pretty good communication quality. This makes it easier to bend to any position where it is most comfortable -sitting or sleeping. It also has an inline mute switch that allows you to have an outside conversation without turning off your call or game. Pros We once again see the same frequency selection, and just like the low shelf filter, we’re going to set this to corner and this time to a much higher number. We suggest starting with a value of 3,000hz. This gives you a nice gradual increase from the upper mid-range. Typical reasonable ranges for this kind of filter would be from ~2,000hz all the way up to 5,000hz. That makes Yeti X an excellent choice for gamers with not-so-ideal room acoustics. It offers four polar patterns, and you don’t need other expensive interfaces since it’s simply plug & play.

So what’s the difference, and why would you need to have these two microphone modes on this ModMic? All microphone products should also work with any USB input for VR sets that offer it, including the Vive and Index. You can use almost any audio program to adjust the EQ of a mic. However, that doesn’t mean necessarily using a 16+ band EQ program. While those minute adjustments may give you maximum control, the reality is a simple shelf filter can probably achieve what you want with far less headache. This is why to start we’re going to focus on the shelf filtering instead of more advanced concepts like EQ matching. The Blue Yeti mic is one of the best on the gaming microphone market, and it is well worth its price. It’s a sophisticated and versatile gaming mic that lets you generate studio-quality sound with your mobile.Pretty much every VR headset comes with a built-in mic, but based on our experience these built-in mics leave a lot to be desired. So how can you get premium audio quality for streaming or apps like VR Chat and other voice-enabled games? Introducing ModMic Gain affects the magnitude of the change. Don’t go overboard, 6-7dB is probably near the maximum you’ll want to adjust in any EQ adjustment. This value can also be negative!