If the Display Port Data Rate is HBR2 then the maximum resolution that Linux supports is 8192 x 8192 (counted with integrated display plus external display). If only one monitor is shown, while the other is not, go to Windows Display Properties, and under Multiple Displays, select the output for the second monitor. Open the Windows Display Properties and go to Multiple Displays control to set the display to the extended mode. NOTES: Linux operating system is unable to physically turn off integrated display. The external display numbers are one less than the display numbers listed in the above tables.

Dell Thunderbolt Docks and Apple USB-C Hosts | Dell US Dell Thunderbolt Docks and Apple USB-C Hosts | Dell US

Power your day: Dell ExpressCharge allows you to charge up to 80% in one hour, making it the most efficient way to manage the workday. Ultimate connectivity: Thunderbolt™ connectivity makes it easier than ever to deliver power, data, audio and video as well as connect to system peripherals, no matter what system you use. Plus, with support for up to three displays, including a single 5K and dual 4K monitors, you can connect to everything you need. Energize your workload: Get more done, faster, with Dell ExpressCharge Boost, a feature that provides up to a 35% charge in just 20 minutes. Secure Connect - Allow one-time saved key devices at a minimum - the CM requests connection approval from the host SW and autoapproval is only given if the host challenge to the device is acceptable.Buy It Direct Ltd is a limited company registered in England. Registered number 04171412. Registered office: Unit A Trident Business Park, Leeds Road, Huddersfield, West Yorkshire, HD2 1UA. Reset the monitor to Factory Defaults. See the User Guide of your monitor for more information about how to reset the monitor to factory defaults.

Dell Thunderbolt Dock – WD19TBS | Drivers Support for Dell Thunderbolt Dock – WD19TBS | Drivers

Thunderbolt (previously called Light Peak) is a hardware interface that combines data, video, audio, and power in a single connection. Thunderbolt combines PCI Express (PCIe) and DisplayPort (DP) into one serial signal and also provides DC power, all in one cable. While Thunderbolt 1 and Thunderbolt 2 use the same connector as mini-DP (DisplayPort) to connect to peripherals, Thunderbolt 3 uses a USB-C connector. HBR3 (HBR3 x4 lanes + HBR3 x1 - 32.4 Gbps) For Precision 7530/7540/7730/7740 with discrete graphics card DisplayPort Only: Automatically connect to DisplayPort devices only. No Thunderbolt adapter or PCIe devices are allowed to connect. User Authorization: Approval is required for any new devices that are connected to the Thunderbolt port.HBR3 is DP 1.4 (8.1 Gbps maximum link rate per lane). With DP overhead, the effective data rate is 6.5 Gbps per lane.

Dell Thunderbolt Dock – WD19TBS Dell Thunderbolt Dock – WD19TBS

For additional help, learn How to Set up Multiple Monitors or How to Troubleshoot Multiple Monitor Issues. NOTE: To learn more about what type of USB-C port is available on your laptop, see the User Guide of the laptop. HBR2 is DP 1.2 (5.4 Gbps maximum link rate per lane). With DP overhead, the effective data rate is 4.3 Gbps per lane Verify if the device is detected in Windows Device Manager and that the correct device drivers are installed.External monitors require a certain amount of bandwidth to work properly. Monitors with higher resolution require more bandwidth.

Use and Troubleshoot Dell Thunderbolt Docking Station How to Use and Troubleshoot Dell Thunderbolt Docking Station

If the integrated display resolution is FHD (1920 x 1080 @ 60 Hz), two external displays with QHD (2560 x 1440) @ 60 Hz could be supported. Note: To learn more about updating the BIOS on a Dell computer, see the Dell knowledgebase article Dell BIOS Updates.Connectivity:multipule portsincludings audio, video, power and data as well as connections to system peripherals. When enabled, this setting allows PCIe devices that are connected through a Thunderbolt adapter (that is PCIe devices behind the Thunderbolt adapter) to perform the PCIe device’s UEFI Option ROMs (if present) during preboot. When disabled, the Thunderbolt Technology feature is disabled, and any connected Thunderbolt adapter devices are not available in preboot or within the operating system. User Authorization - Allow User Notification devices at a minimum - the CM requests connection approval from the host SW and autoapproval may be given based on the Unique ID of the connecting device.