Some cordless phones do use that frequency, however. If you have one, just keep it away from your system. However, if there is any interference, you can use the sync button on the rear to change the transmission channel. For a seamless connection without interfering with your garage door, Wi-Fi router, or cell phone, the WSA-5TR uses advanced 5.8GHz wireless technology. The first and most common option is to use a separate amplifier. In this case, make sure to connect RCAs from the receiving unit to the amplifier, then to connect the speaker wire from the amplifier to the speakers. Also, make sure to plug the AC adapter into a power outlet and connect the other end to the receiver. Each kit features a WSA receiver and transmitter, both created in a compact design for easy and fast installation.

You may not be familiar with DYNASTY PRO AUDIO who are a relatively small concern that offers solutions for wireless audio. In other words, they specialize in exactly what we are looking at. Whilst they may not be so well-known, they offer a good product that is reliable and very cost-effective.

Choosing a Wireless Speaker Conversion Kit

You would do this if the speakers being used are passive. Meaning the speaker(s) do not have their own power source or an internal amp. And of course, you will need to plug the AC adapter into a power outlet and connect the other end to the receiver. Using a Receiving Unit with a Built-in Amplifier (Less Common) This becomes an even bigger issue for rear speaker units and the subwoofer unit. Thankfully, you can connect such speakers wirelessly using one of the best wireless speaker kits given down below thanks to these features offered by them:

This system works perfectly for small to medium-sized rooms, however, it isn’t exactly whole-house compatible. The range covers only up to 80 feet, line of sight, and 60 feet when obstructed by walls. And if everything is set up and working properly, then you have successfully learned how to make regular speakers wireless! Conclusion From there, all you need to do is plug in the receiver to your wired speakers and Voila! Your wireless system is complete. Sound Quality

The transmitter can pair up to four receivers, although it only supports two channels—left and right. OSD WRSK-250 Wireless Subwoofer & Speaker Kit The runner-up best wireless speaker kit with the most compact design. First off, you’ll want to think about the range. How far can the transmission go across your house to the receiver? While a lot of these products boast a 300 feet or 100 feet range, you’ll have to consider some allowances for this. First, let’s make sure the receiver is receiving a strong signal from the transmitter. If the sound produced by the connected speakers contains static, sounds unclear, is delayed, etc. then you should probably adjust the position of the transmitter and/or receiver.