Tools and equipment should be cleaned with warm soap and water immediately after use. DO NOT allow to dry before cleaning. HEALTH & SAFETY PRECAUTIONS Standard delivery is always free except to the Scottish Highlands & Islands, Northern Ireland & other UK offshore Islands. Disclaimer: “Unibond” is a registered trade mark, owned by Henkel, and is only used here as a product review. Thank you One specification to look out for is the VOC level. VOC stands for volatile organic compounds, and they are incredibly bad for your health and are regulated by law. Look for lower VOC levels because they will be less toxic and have lower fumes. The surface becomes darker and unattractive. Over time excess trapped moisture darkens the surface.

However, it’s not the best idea to get too big of a container as it can get wasted if you don’t need it in the first place. That’s why you need to identify the length of the surface that you are going to be working with and choose the quantity of the sealer according to that. Now that all of the loose bits and rough spots were removed, it was time to remove actual soil. We started this step of the process by laying drop cloths around our work area to protect our newly finished floors. Next we liberally sprayed a 4:1 ratio of Simple Green over small sections of chimney and allowed it to sit for a couple of minutes. Unit 1 stairs to lower level Our clear stone wall sealer, by contrast, is an advanced water-based fluoro-carbon which leaves no visible trace. It effectively repels liquids to protect the appearance of your stone surfaces without darkening. Liquids "bead up" on the surface and are not absorbed into the substrate, thus protecting your stone against staining. Suitable for interior sealing of:

PREPARATION & APPLICATION

Make sure that you get the best one that you can afford. That’s going to ensure a hassle-free service and you don’t need to go and reapply the coat over and over again. The Quantity of the Sealer Lightly brush the solution onto the wall, starting at the top and working down and remember to wear washing up rubber gloves whilst doing it. Store indoors in a cool dry place. Shelf life of Kingfi sher “Stone Sealer” is approximately 12 months from date of manufacture.

After sealing your surface, use soapy water or mineral spirits to clean out the sealer from the pump sprayer. You may also want to read the manufacturer’s instructions for other cleaning tips. Another great thing about this seal is that you won’t have to clean your walls constantly once you apply the seal. It’s going to prevent the moss buildup and also help to fight dirt, which is a great thing. Stormdry only requires one coat, and we found that it was touch-dry after a few hours and water repellent after two days and largely water resistant after 28 days.Sealants are environmentally friendly and are proven to be very effective for over 10 years. The right sealer will protect the surfaces natural appearance, all the while offering outstanding protection against water, chemicals, dirt and sunlight. Using Clear Sealants to Waterproof Surfaces