I might not press the pencil down hard enough to get the gears to revolve. This could be because of many years of using fountain pens (which do not need a lot of pressure) and a relatively infrequent use of ballpoint pens (which need much more pressure). When I went to school you had to write with a fountain pen and today I still like to use fountain pens and avoid ballpoint pens. My wife, for example, is using much more pressure when writing. The Kuru Toga is a mechanical pencil from uni / Mitsubishi pencil. In Japan it has been available for more than a year. The plastic version is now officially distributed in the UK and other countries, while the successor, the new Kuru Toga pencil, is already available in Japan.

Of course with drawing, it's a mix of long and short strokes. In the picture above, one sketch was drawn with a normal mechanical pencil while the other with the Kuru Toga. I've forgotten which I've used for which. The visual difference is actually quite subtle. But when it comes to drawing, it does feel better to be drawing with the Kuru Toga. The thing that bothers me about the Kuru Toga most though is the play that is needed to use the mechanism. I prefer to write very small characters, and precision is important. When writing much larger, it’s not an issue, but for tiny, complex characters, there’s a bit of a tactile disconnect, which makes the whole thing feel less precise. It reminds me a bit of some retractable-sleeve pencils with a lot of wobble to them.

PASSIONATE ABOUT PENS

You know how sometimes when you draw for too long, the pencil becomes blunt, sometimes you may rotate the pencil to the sharp side of the lead that gives you a thin line. When you're writing, you'll immediately see and feel the difference. With the Kuru Toga, I can actually feel the difference but can't really see the difference unless I'm really looking out for it. I’ve used quite a few Kuru Togas and own one of the 0.5mm versions, and I agree with the original poster that you need to use a certain amount of force to engage the mechanism, particularly if you hold the pencil at a fairly low angle. I prefer using softer lead and much less pressure, and get pretty inconsistent results most of the time, unless I change my writing style. Holding the pencil so the logo appears between my thumb and index finger, I can write a complete sentence without seeing the logo move at all.

Kuru Toga is a mechanical pencil line developed by the Uni Mitsubishi company. The special feature of this pencil is a particular mechanism (referred as "Kuru Toga Engine") which rotates the lead every time the tip is pressed and then released from the paper surface. I recommend getting the transparent grip version if you want to see the gear turning. The Starter kit (above) has a grip tinted in colour and it's not easy to see what's inside. Limited Edition; special auto-feed mechanism where the lead sleeve doesn't drag on the paper; adjustable length auto-feed mechanism; magnetic cap; the lead is automatically exposed when you uncap the pencil For the metal body pencils, there's a little hole that you can see through to the logo that's turning.

So with each stroke, the lead will turn, and you will get a sharper point to write with the next stroke. and the inability to fill in as many spare leads as in some other mechanical pencils (maximum 4 – 6 leads, depending on length and whether you try hard to squeeze them in)

I’m a light writer and I use pencil for everything except things like forms and cheques. I usually go for B lead to get dark lines and less pressure. All Kuru Toga pencils are available in 0.5 mm and in a variety of colours, but some models are also available in 0.3 mm and 0.7 mm. It might be a substandard pencil, and other Kuru Toga Engines work with less pressure. This would would mean that there is a quality control problem at uni / Mitsubishi pencil. This is probably not the case.

No results found.

As many of you have post about problems, I’m not sure is it because of writing in different language. For example, English language can be written one word without lifting the pencil, while Japanese have to lift the pencil several times for one word. Therefore Japanese language may be rotated 10 times faster than English (Just my guessing). Roulette" and "High Grade" use the Uni eraser refill size C, while all the other models use the Uni eraser refill size S. The standout mechanical pencil from the Pilot Dr. Grip line is the Ace Shaker. Its ergonomic design has earned an “Ease-of-Use" Commendation from the Arthritis Foundation. The Ace Shaker’s double layer grip is flared to prevent you from cramping your fingers up too close to the tip. The grip itself consists of a firm rubber outer layer and softer inner layer. This results in a moderately soft grip that is comfortable to hold and ensures you have a stable grasp on the pencil. In combination with the barrel’s optimized weight balance, this pencil is perfect for longer writing sessions. All models except the "Pipe Slide", the "Advance" and the "Advance Metal" (also known as "Advance Metal Punching Grip”), rotate the lead approximately 9 degrees per stroke (40 strokes for a complete revolution). The Uni Kuru Toga are available in many different types of bodies and comes in three tip sizes: 0.3, 0.5 and 0.7mm.