The kit contains a 5g tube of Stormsure Flexible Repair Adhesive ( Allow 24 hours for the adhesive to cure), a 15cm TUFF Tape strip, two 75mm (diameter) TUFF Tape patches, along with protective gloves. Stormsure Flexible Repair Adhesive is a polyurethane-based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents. DIRECTIONS: Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours. Stormsure Flexible Repair Adhesive can repair everything from worn material to a large hole. Repairs are waterproof, flexible and resistant to abrasion (weather and water abrasion).

TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. Cured clear adhesive may change to a pale yellow colour when exposed to bright light. It may not look great once you have finished, as you will find you have covered half the boot with glue, but it will work. Repairs are permanent, strong, waterproof, flexible and resistant to abrasion (weather and water abrasion). Test for compatibility on a small inconspicuous area before making a major repair. Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours. How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.Stormsure Flexible Repair Adhesive can repair everything from worn material to a large hole. Repairs are waterproof, flexible and resistant to abrasion (weather and water abrasion). Allow 24 hours for the adhesive to cure. Stormsure is the main brand from Stormsure Ltd. Stormsure Flexible Repair Adhesive is the Flagship product and where Stormsure begin it's journey 20 years ago. Stormsure Flexible repair Adhesive is our very own formula which works differently to almost all other adhesives on the market today. It's polyurethane composition and moisture curing properties make it completely waterproof, extremely durable and very very strong making it the perfect solution for almost any repair!

Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use. Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications. Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 10-12 hours. The kit contains a 5g tube of Stormsure Flexible Repair Adhesive, two 75mm (diameter) TUFF Tape patches, along with protective gloves.

Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface.