While colder options may exist the 1-step and 2-step colder spark plugs are the most common choice on the N54. Among the two most popular are the NGK 97968 1-step colder and NGK 97506 2-step colder. These are generally good options even for 600-700+whp builds, which is why we don’t fully agree with the 75-100 horsepower rule. I am running full intake/exhaust, including FMIC, and diverter valves and am catless. I am running a BMS WMI kit with dual nozzle BC 10 Chargepipe injection. So here are some questions I have, and would like to hear any other observations people have as well:

FFS you seriously need to do maybe 10 minutes of research before speaking on a subject. You continue to prove over and over again your "20 years" of experience is about as useful as zero years of experience. These plugs are suggested for most turbo BMW motors including the N20, N54, N55, S55, N63, N63TU, S63, and S63TU applications. This bulletin is notice of a “limited warranty extension.” This is NOT a notice of a Recall or Service Action.

For a customer to request reimbursement for a “qualifying customer-pay repair” performed either by an authorized BMW center or independent repair shop located in the United States (including Puerto Rico), please have him/her submit his/her reimbursement request “online” at www.BMW-RP.com . These plugs are suggested for most turbo BMW motors including the N20, N54, N55, S55, N63, N63TU, S63, and S63TU applications. Note BMW B58 uses a different NGK part found here. Often specified as original equipment, NGK Laser Iridium spark plugs are the best combination of performance and longevity.

Discussing spark plugs for the BMW N54 engine can be a lengthy topic. While spark plugs are a pretty simple part they’re extremely important, and there’s a lot that goes into the right setup. How often should you change spark plugs? What are colder plugs and when are they needed? What are the best spark plugs and gaps? None of these question have perfect answers, but there are some general guidelines. In this guide, we discuss some of the best N54 spark plugs, 1-step & 2-step colder, plug gapping, replacement intervals, and more. Pin Spark Plug Heat Ranges Moving over to a 1-step colder NGK spark plug did seem to help clean up timing and misfires became less common. Exact results can vary from car to car. Still, the OEM plugs can start becoming more problematic too far beyond 400whp. If you’re around that number and aren’t having issues then there isn’t much reason to change things. Which spark plug is right for each person, engine, mods, tuning, etc can vary a lot. That’s why we put some larger and overlapping power levels above. It’s not like all OEM spark plugs are going to start having endless issues right at 375-400whp. Likewise, 2-step colder spark plugs are probably OK even at 400whp. deeper into the chamber is a country mile inside of a combustion chamber, and short of getting in the way of the spray pattern, would seem to be a good thing.All spark plugs remove some heat from the plug tip and transfer that heat to the engine cylinder head. Colder spark plugs are faster and more efficient at transferring heat away from the spark plug tip. Basically when you hear cold plug it means the spark plug transfers heat away from the tip rapidly. Hot plugs are slower at transferring the heat, which means the firing tip remains hotter. As you increase boost and power on the N54 you’re increasing cylinder combustion pressures. That leads to more heat than the N54 OEM Bosch spark plugs were designed to handle. In turn that may cause pre-ignition and spark plug overheating. Not good. However, going too cold can cause spark plugs to foul faster than normal. This is because colder plugs may remove too much heat and not successfully burn off deposits. Okay its gotten to that point where the influx of newcomers to the platform is rapidly rising and there are several common questions that get asked repeatedly and this will focus on a few maintenance items. For the sanity of the veterans to the platform, it is nice to have threads like these to reference. This post will hopefully answer some of those questions and I will update this as much as possible as information evolves. Lets get to it: