The WiFi client interface shows the selected WiFi network SSID, RSSI signal strength bars and the uplink bandwidth (in Kbps) currently being used. When your modems, or your modems, Wi-Fi and LAN, are setup this way, you may get some or all of these behaviors: Once you have your account created, you will be asked to register your device if you have not already done so. The unit won't show "Ready" or appear online in the LiveU Solo Portal, even though the modems (dongles) show with green icons in the Connections list on the unit

Get the most out of your LiveU Solo SDI/HDMI with the LiveU Reliable Streaming Service. Patented cloud bonding & encoding service for maximum bandwidth and ultimate reliability using LiveU Reliable Transport (LRT). But that is ok! that i all you need. Sometimes, they would let you change the subnet entirely - but you don't need to, editing that third octet is exactly what we want to do anyway.Any number from 11 to 255 will do. Avoiding the "common" ones of 1, 8, and 10 will help avoid future conflicts with WiFi networks or LAN networks. Save the Settings and Reboot the Device and Solo hours of untethered streaming. Broadcast time can be extended by 4-6 hours per Power X1 External Battery . You frequently get the Communication Error message on your unit - particularly only when using it with modems (vs on only LAN or WiFi) While the unit does have a start button to go live, some services need supplemental services started, such as transcode engines or rendering engines. In these cases, LiveU Solo portal manages thosesupplemental services for you, but can only do so when you start the stream from the Go Live buttoninside the portal.

Once a cellular USB dongle (that contains a valid and working data SIM) has been connected to either (or both) these ports, the Solo will automatically dial and connect the dongle, updating the information accordingly. These are just two examples, if some of the digits in your exact setup differ, it is still a conflict! Conflicts Connect two cellular modems with Wi-Fi and LAN and we will bond them together to create a single fat connection for all your needs. OVP/CDN Integration Her are some example conflicts, with each line in the example below suppose to represent 1 of 2 modems or other connections: 192.168.8.100 H.265 HEVC / H264 high-profile video encoder, 4Kp60/50/25/30/24, 1080p50/60/25/30/24, 1080i50/60, 720p50/60, PAL, NTSC at up to 20,000Kbps.

About Subnets and IP Routing

Combining up to 6 internet connections: 4 external USB modems (5G & 4G), WiFi & Ethernet over LiveU’s industry’s proven LRT™ cellular bonding protocol. Select Disable and press the Center ( OK) button to disable the interface. The Disable button of the interface changes to Enable, indicating that the interface is currently disabled. I think, if you read this far, you probably now see why this is a bad idea. This is a guaranteed conflict as the LAN and WiFi are coming from the same router. You Plug in One Modem But I Also Join WiFi Plugging one unit into the same network via more than one means (LAN and WIFi)? Always going to be a problem. While each device is a little different, here are general steps that are applicable to all devices to help guide you. Get To The Settings For Your Device

However, almost all modern (sold in the last 3 years) modems now use another technique to provide bandwidth to a host device - virtual ethernet ports. Why? the answer is pretty straightforward: this makes host OS support much more general, and alleviates the need for specialized drivers on the host OS. Especially for modems sold to consumers, its easy to see why this method of acting like a virtual ethernet port is beneficial to these devices. Conflicts can happen this way too. What if the WiF I join happens to use the 192.168.8.0/255.255.255.0 subnet? Just as above, we are now in conflict.

How To Fix It

The Interfaces option in the Main screen indicates the number of active interfaces out of the total number of interfaces on the LiveU Solo. In the example to the left, 4/4 means that there are four active interfaces out of the four total interfaces on the unit (2 x cellular, 1 x WiFi and 1 x Ethernet network interface). Solo can be connected to any camera with both SDI or HDMI options allowing you live stream video in full HD, going beyond cellphone quality. Bonding When moving from the Home screen to the Main screen, the Interfaces option is initially selected, as shown above. The selected option is highlighted in gray on the screen. Sometimes, the device may only let you set the "third octet", the "1" in this example: 192.168.1.0/255.255.255.0 But anything less than 255 in that position means more than one number is used, and if its a "0" it means all 256 numbers are used.