The grain patterns in oak wood vary significantly, ranging from straight and uniform to wild and pronounced. These unique characteristics make oak an excellent choice for staining and finishing, adding depth and dimension to the overall appearance. A. We recommend leaving the stain to soak into the wood for one or two minutes before wiping the excess off. This will prevent the stain from staining the wood too dark; you can then apply a second application of Wood Stain if you want to darken the wood further. After staining wood, you should finish the job by sealing the stain in with one of our Wood Waxes, Wood Varnishes or Wood Oils. These will enhance the colour of the stain further, provide additional protection and can be used to alter the finish to either satin or gloss.

The mixture does not contain substances classified as ‘Substances of Very High Concern' (SVHC) = 0.1% published by the European Our Wood Stain is available in 9 different colours, including a Light Oak Wood Stain (we call it Natural Oak) and a Dark Oak Wood Stain; the two Oak Wood Stain colours we’ll be using in this blog post. The Wood Stain instructions below explain thoroughly how to prepare wood, stain wood, and then how to protect wood afterwards. They will help you get the best results when using our Wood Stain. Preparing Wood for Staining Before we discuss stains and finishes, it's essential to understand the inherent qualities of oak wood. A highly concentrated wood stain that stains wood in one simple application. The formulation is water-based and so is safe to use in all environments, has a very low odour and is non-toxic.If you have any questions regarding staining wood or about our products, please don’t hesitate to get in touch. Dark Oak Wood Stain Examples Whether making furniture, installing flooring, or building cabinetry, choosing the right stain and finish can bring out oak wood's natural beauty. A. If the surface is dirty clean it first with a suitable Wood Cleaner. Otherwise, sand it with #100 Sanding Pad in the direction of the grain. If the wood is freshly sawn, you may need to start with something more coarse such as 120g sandpaper and work your way up with the Sanding Pads. New Wood – Needs to be sanded first to create a lovely smooth finish prior to applying the Wood Stain. Sand first with 120g sandpaper, then with a #60 Coarse Sanding Pad (240g sandpaper), and again with #100 Fine Sanding Pad (320g sandpaper). This process will help even out the surface, creating a lovely smooth finish for the stain to absorb into. We would always recommend that you test the different shades of Oak Wood Stain on a small area of the wood, before staining the entire piece. For this, our Wood Stains are available in small 15ml tester pots so you can make sure you are happy before purchasing larger sizes. About our Wood Stain.

After staining wood, you should finish the job by sealing the stain in with one of our Wood Waxes, Wood Varnishes or Wood Oils. These will enhance the colour of the stain further, provide additional protection and can be used to alter the finish to either satin or gloss. Wood Stain Options Gel Stains: Gel stains are a fantastic option for achieving an even finish on oak. They provide excellent control and minimise the risk of blotching, a common issue when staining oak. Gel stains sit on top of the wood surface rather than penetrating it, making them easier to apply and allowing for better colour consistency. They are also available in various hues, offering versatility in achieving multiple decorative effects. As previously mentioned, our Wood Stains are water-based so can be diluted to achieve a lighter shade, or you can mix our Natural Oak and Dark Oak Wood Stains together until you achieve the colour you desire. Test the Oak Wood Stain FirstA. You shouldn’t sand wood after you’ve applied a Wood Stain. The wood should be sanded prior to staining. If the wood stain raises the grain of the wood, you can sand the wood and then restain.

A. Sealing wood after staining isn’t required, but it is recommended. Not only do wood finishes enhance the colour but they’ll also protect the wood from scratches and help stop it from fading. We recommend using a Wood Varnish. Buy our Tester Kit that includes 9 colours of Wood Stain that we do(15ml Tester Pots in Slate, Warm Graphite or Grey are not included in the Tester Kit). Using wood stain on external items and surfaces offers both homeowners and professionals several big advantages. For example, it prevents the wood from rotting if it hasn't already been sealed. It also protects wood from moisture and sun damage, preventing the wood from breaking in freezing temperatures and unsightly discolouration.

Hardwax Oil: Hardwax oil finishes are an excellent option for those seeking a more natural, low-sheen look. They penetrate the wood, enhancing its natural beauty while providing protection. Hardwax oil finishes are easy to maintain and repair, making them popular for high-use areas such as kitchen countertops and flooring. A. Wood Stain is designed to penetrate into the wood and so the longer you leave it on the more it will soak in and the darker the wood will become. Wood can also only absorb so much stain before it becomes saturated and so any excess would then dry on the surface. This is why we recommend wiping the stain off after one or two minutes. Achieving stunning stains and finishes on oak wood is a journey that requires careful consideration and attention to detail.