I liked to start from the cornerto get the bigger piece off and then use my weeding toolsto get the smaller bits.

Unzipthe file. If you do not have a program installed on your computer to unzip, I recommend 7-zip. (It’s free! Windows only)

I put the glass panel on my cutting mat because it has a grid that I can use as a guide. I put it in the bottom cornerand then placed my album cover first to see how I wanted to center it. So, I found an old frame, printed out a picture, chose a song from Spotify, and made a SVG file to use and put this together. And when you scan the code in Spotify it plays a song from Hamilton! Materials Needed for Cricut Music Plaque

Inside the free Spotify SVG template is a png file. You can use that PNG file to either print on printer paper and paste that onto your glass or acrylic piece OR you can put it underneath your glass/acrylic piece and use a white marker (like a chalk marker) and trace over the top of the template on to your glass There is also a smaller blue box that you can put the song length in. I recommend deleting this layer as well as the 0:00 timer unless you are making a larger design. This was very difficult to weed. I liked to start from the corner to get the bigger piece off and then use my weeding tools to get the smaller bits.floating picture frame (you can also use acrylic but these floating frames are perfect so you since they already come with all the hardware to hang the artwork)