As well as providing rapid set concrete for backfilling around manhole gullies and frames, which can also be used for surface repairs around street furniture. Remove all ponded water prior to application but ensure that joints remain wet while the product is use. I'd coat the entire surface with a grout release product, Aqua Mix's has worked well for me, prior to any more grouting. I'm using the same mortar the brick layers used outside (ready mix) which I saw them use in a grout bag for the brick along the sidewalk but I can't get it to work. Cempoint is mixed as per the instructions on the bag, then transfered into a wet mortar gun with a trowel.

a) is a grout bag supposed to be easy for working on around the thousand or so joints between the 500+ bricks that I have ? I thought that I would mix the mortar with water, until like peanut butter, then slop it into the grout bag, and start squirting it, with the ease and precision similar to how my wife decorates a cake. I am using a pre-mixed mortar, and the instructions say simply "add water until reaching desired consistency".Cempoint is now available in Natural, Light Brown, Light Grey, Dark Grey, Sandstone, Yorkstone, White, Dark Brown, Brick Red, Black. Factory blended mortars are more consistent but often require a higher minimum quantity than a project requires.

Best use for grouting caulking masonry or tile joints stone brick mortar block cement piping bag projects. Please note: a small trial should be done to ensure compatibility with the stone/paving being used as Instarmac cannot test all stone/paving types. I havent done any in a while, but I always used a concrete finishing trowel(like a hawk, just long and narrower) on which I put a "log" of mortar down. RePoint VE is designed to be installed using a grout bag, mortar pump, or grouting sponge where applicable.Available VE (Viscosity Enhanced) formulas to allow for pumping, bag install or when greater workability, extended working times are desired. The gun is moved steadily along the prepared joints between the paving slabs or brickwork, squeezing the gun to release the mortar into the joints. It is important to determine the thickness of your joints prior to attaching the veneer so you know which size tuck-pointing trowel that you will need to use or purchase. Again, terms can be confusing, but by listing the manufacturer and product name we can nail down solutions a little better. Test cleaning methods prior to beginning to ensure they will not adversely alter the color or texture of the joints.

Anyways, is there a technique for adding water, like add the mortar to the bucket first, then add water, or vice versa ?Cempoint for Walling: UltraScape Cempoint is a cementitious thixotropic mortar, designed for gun injection which provides a clean efficient solution for the pointing and repointing many types of brickwork and masonry facades.