A light with 90 CRI and above would be classed as having high CRI, while 80 CRI is the standard for LEDs.

Cool white (or neutral white), although clearer and slightly brighter than the others, it can make a room feel cold and clinical. Selecting the appropriate color or finish for your lights and switches is key to creating a unified and attractive interior. Simple to install to add a touch of style to any room, a range of colours are available to suit any décor. IP (International or Ingress Protection) defines a products level of resistance to dust and moisture. Anyhoo, once set, coat the exposed edges of the p'board with PVA and fill up to your round former with the filler.

Indoor Lighting Wall Lights Spots Downlights Downlights Bathroom Downlights Kitchen Mounted Downlights LED Strips Ceiling Lamps Ceiling Fans incl. C-FIX Repair Kit, seldom see them over here, but linky below shows what they do, should be easy to fabricate something to achieve same result. For those who still aren't convinced about integrated LED technology, take a look at the FireGuard GU10 downlight.

LED Ground lights Ground lights GU10 Ground lights MR16 Ground lights 12V Round Ground lights Cube Ground lights Ground lights incl. The 150mm bezel on the converter downlight will easily cover a hole of up to 120mm diameter and can be used with larger holes if assisted with a little Gripfill (the master of all building adhesives). It is a measurement of how well a light source renders the true colour of an object compared with natural daylight.

With the cover rings for the recessed downlights, you can easily adapt any room to your taste and style. A hell of a lot of work, but did the trick and no chance now of the fittings being pulled through the ceiling again. So see if you can get a round piece of downpipe or similar that you can make the correct size - it may be that you'll need to cut a slice out of it and close it to a smaller circle.

You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. They can also cover up any mistakes with cutting the right size hole for your light – we won’t tell if you don’t! Simple, modern, space-saving and regularly used for an ambient effect, downlighting is the lighting solution of choice in all kinds of settings, from vast public buildings to family homes. Made from fire resistant (euro class B) MDF with a galvanised steel band liner and fixed with screws and structural filler, the repair kit allows not only the repair but also the repositioning and resizeing of downlighter cut outs. The cut-out diameter makes these products suitable for replacement of most R63 and some R80 downlights.This gives allowing the option of exchanging larger out dated fittings for new smaller modern fittings as well as reinforcing them to prevent further damage. Crucially the repair kit requires no access to the ceiling space, its design allows it to be manoeuvred through the cut out and fitted inside the ceiling leaving it invisible from below. In the end, I cut some squares out of hardboard, cut holes with a holesaw and then mounted these behind the plasterboard and then skimmed over. Check the dimensions tab within each product listing to confirm the exact hole size of each downlight. In a moment of desperation, and needing a quick and easy fix, I bought a couple of small 99p round beech bread cutting boards, fitted the down-lights in those and screwed the boards to the ceiling.