The Dipping ink range is the best speed painting solution on the market to contrast your miniatures and gain more time for the game. The airbrush can be used for a lot of different effects and is super effective if you’re painting armies or larger scale models. Browse through our range of brands available, including Corgi, Diecast Masters, and Greenlight – there is plenty to choose from!

It’s likely you already know this, but there were a few reasons I wanted to get an airbrush, and many more advantages I’ve found since. Seriously, if you don’t get an airbrush free with your compressor consider starting with the cheapest airbrush you can find, but there is one other minor consideration. Professional tool for commercial or occasional use Perfect for model painting, body painting, nail arts, fine arts, car painting, photo retouching, cake decorating, textiles and T shirt paining -Can be plugged with AC transformer or DC 12 v battery (battery not included) Perfect for gravity airbrush to make up, cosmetics and hobbies Perfect for all levels of sprayer / users AIR COMPRESSOR SPECIFICATIONS - Pressure adjustable - Air flow control knob for adjustment of air volume - Over pressure protected, constant pressure and zero pulsation - Operates at absolutely low noise - Lightweight and portable - Input AC 220 -240V / 50/60 HZ / 0.It even fits my Iwata Airbrush too, so when this cheap generic airbrush that came with it packs up or isn’t fit for purpose – I can switch to my Iwata with ease!

To provide the distinctive gloss of the bodywork, we have created a special lacquer formula with the accompanying catalyst and thinner. This is great for any enthusiast collector as you can display for years and pass it down to the next generation. which is fine for the convenience, but you can easily thin any of the existing Citadel range with something like Car Screenwash or Distilled Water. My first quick test was to grab a previously primed and sprayed Munitorum Armoured Container and put a layer of Dawnstone Grey over it.

This is for chipping at a later date, which doesn’t matter here in this article and doesn’t affect what I am doing with the Dawnstone Grey.

By applying low-pressure, low viscosity paint through your airbrush, you can create buttery smooth surfaces and finishes. and that’s one of the main things to do with your first airbrush, cut your teeth on something inexpensive. I will stress that this guide is not for everyone, because not everyone wants or even cares about airbrushing. The A-Stand range offers a complete solution for the modeller: it includes an extensive colour chart of metallic and transparent tones, as well as primers and varnishes. You can read all the detail below you want but this is actually really easy, you just need two things!I’m no airbrush pro and there might be ten reasons not to try and use one of these if you an airbrushing pro.

and I thought it was worth a try as I alternate between my man-cave and home so something portable would be useful. The point is, if you start here, the majority should never need to upgrade their compressor further. When you are done, clean it, Spray lots of water through it to clean out the inside, If you have some, spray some thinned down IPA through it which you may have bought already after following this paint stripping guide.Next, grab that piece of paper that came in the case with the airbrush, most of the writing is in Chinese or Chinglish (that sounded way more racist than it was meant to, but my spellcheck agrees that its a word). As soon as the connected spray gun is activated or the pressure drops below 3 bar, the compressor is reactivated.