EASYSEAL Sandstone Seal+ENHAN 5LT

Product Information

NOTE: You may also use a refrigerant cylinder to push sealant into system while charging if the system is low on refrigerant. Just connect EasySeal Ultimate to service port and inject refrigerant through injector into system while charging. The EasySeal line has proven to be the number one trusted leak sealant brand for years, with millions of leaks sealed. Now Nu-Calgon has made EasySeal even better with EASYSEAL ULTIMATE – the strongest and fastest leak sealant on the market, now with the ability to treat systems up to 10 tons in one application!

Treat any efflorescence or staining before application, allow a few weeks before applying EASYseal BCS to ensure efflorescence doesn’t reappear Apply EASY Seal BCS with a brush, roller or low pressure sprayer at a rate of 3m2 per litre for the first coat Apply a second coat whilst the sandstone remains damp from the first coat. Timing depends on temperatures and the type of stone* (This sealer enhancer is suitable for most types of natural stone). This vapour control layer has been designed for use on habitable buildings, meaning it is compatible with structures that see a lot of residential use. This product is ideal for use on a range of different flat roof projects, with porches, garages and extensions just some of the structures this roof can be used on effectively. Run system continuously for a minimum of 1 hour to allow product to fully circulate through system.This product is not suitable if surfaces have been treated previously with a silicon or stearate based water repellent

The EasySeal Underlay is manufactured with an inert glass fibre base, coated with SBS modified bitumen. The IKO EasySeal roofing membranes should be installed generally in accordance with BS 8217: 2005, ‘Code of Practice for Reinforced bitumen membranes for roofing’ and IKO fixing instructions. EasySeal roofing is applied as a two-layer system, bonded by the removal of the release film on the reverse of the product, in accordance with the detailed 'Step by Step' fixing instructions available from IKO. A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil.

Nu-Calgon

upper surface has a non-removable polyethylene film, with a removable release film to the underside. Both the capsheet and underlay have specially formulated self-adhesive additives in the coating. The EasySeal self-adhesive roofing system has been designed to remove the requirement for hot bitumen and or naked flames for anyone installing roofing membranes. EasySeal is a two-layer high performance system, which was originally developed for small roofs, such as those over garages, porches, extensions and dormer windows etc. However, the fire-safe benefits of EasySeal are equally applicable for large projects. The self-adhesive application process, using no hot bitumen, gas torches or large amounts of messy liquids, makes it an ideal option for experienced contractors or competent DIY installers alike. Fantastically versatile vapour control layer that can be used as part of a complete Easyseal system, or alternatively a torch-on or even single ply roof build. Manufactured from a polyester base with an SBS (Styrene Butadiene Styrene) bitumen coating, this Easyseal roofing top sheet also features an upper surface with a special finishing of slate mineral. The release film protects the underneath of the sheet and can easily be removed with ease when installing to BS 8217: 2005, 'Code of Practice for Reinforced bitumen membranes for roofing' and IKO fixing guidelines. Features & Benefits: IKO Easyseal / Coldseal Self-Adhesive Top Sheet Roofing Felt - 6m x 1m Located in the North East of England, Easyseal UK are a well established company providing effective solutions to all your industrial roofing & wall-cladding problems, plus asbestos roof renovation. Approved contractors for numerous manufacturers of liquid coating and single ply membrane waterproof systems, Easyseal have carried out projects across the entire United Kingdom. Services we provide include:

metres of control layer means you’ll be able to cover plenty of area on your roof with just one roll This Coldseal Self-Adhesive Top Sheet Roofing Felt from IKO is a part of their Easyseal system that doesn't need any flames during installation. As a result, you have an increase in safety and a reduction in difficulty for application. EASYSeal BCS is ideally applied to a dry surface but can be used on lightly damp – not wet or soaked surfaces, must be free from standing or ponded water

External wall cladding requires protection from the weather and pollution and we can offer a range of coating systems which will protect most surfaces from plastic-coated metal cladding to Asbestos wall cladding sheeting. Frequently Asked Questions About the IKO Easyseal Air and Vapour Control Layer - 1m x 15m What sort of projects can this product be used on? Incredibly easy to apply to your roof, the installation process can be carried out by DIY enthusiasts and professional builders alike

Surfaces should be clean, dry and free from mould, debris, algae and efflorescence before applying to the sandstone No need for naked flames or melted bitumen thanks to the super strong adhesive on the underside of this sheet In most cases, one can will seal systems that have lost all refrigerant in as little as seven days and is designed for large systems up to 5 tons. For systems 1.5 tons to fractional, use A/C EasySeal-SS. For commercial systems with refrigerant charge of 125 lbs. – 250 lbs., use A/C EasySeal-XL.

Frequently Asked Questions About the IKO Easyseal Air and Vapour Control Layer - 1m x 15m

Attach other end of charging hose to low side service port. As this is done, there will be a very small release of system charge that will purge air from the hose. Work diagonally across the joints, in straight lines & in one direction, do not allow the material to pool A minimum of 3 months should be left after the installation of a new driveway or patio before sealing to ensure that any efflorescence or staining has had time to dissipate