Krone LSA Plus Wiring Tool

Product Information

However, the punch down tool blade also is usually used to cut off excess wire, in the same operation as making the connection; this is done with a sharp edge of the punch down tool blade trapping the wire to be cut against the plastic punch block. Some blades have one end that only inserts the wire for daisy-chain wiring from post to post, and another end that inserts wire and trims the excess length for termination at a post. When connecting network cable into face plates and network modules the punch down tool makes it much easier. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. These low-cost tools are more time-consuming for making reliable connections, and can cause muscle fatigue when used for large numbers of connections.

Tool blades without the sharp edge are also available; these are used for continuing a wire through a slotted post to make connections with another slotted post (" daisy-chained" wiring). The concept uses impact punch-down tools to force a wire conductor into an IDC (Insulation Displacement Conductor) terminal slot. Due to the size, weight and delicate nature of Data and Server Cabinets, specialist couriers are required so they arrive on site in pristine condition. If this cutoff feature is heavily used, the tool blade must be resharpened or replaced from time to time. We have a vast array of punch-down tools like the Krone Type IDC Punch-Down Tool, the TE (Krone) 2A Insertion Tool with Sensor, the 110 Adjustable Impact Punch-Down Tool, and many more.For light-duty use, there are also less-expensive punch down tools with fixed blades and no impact mechanism.

With a single push, the spring loaded mechanism will trigger the blade at just the right point to seat and cut the wire to size. A punch tool is used by pressing the sharp end on the workpiece and then striking the blunt end with a hammer or mallet. Most punch down tools are of the impact type, consisting of a handle, an internal spring mechanism, and a removable slotted blade.All the information gathered is anonymous and we only use it to improve your experience on our site. To do this, the wire to be cut is trapped against a plastic punch block by the punch-down tool's blade's sharp edge. Cablenet can supply a wide range of active equipment including power over ethernet and intelligent power devices. Krone Style Punch Down Tool, Suitable for 110 block connections, Built in a cable cutter, Built in wire hook, Suitable for Cat.

The Krone style punch down tool features a scissor action cable trimmer which activates during the punch down process. The tool blade does not cut through the wire insulation to make contact, but rather the sharp edges of the slot in the contact post itself slice through the insulation. Browse our range of fibre optic and copper patch leads, fibre optic patch panels, MPO leads, MPO panels and our range of direct attach cables and SFPs to keep your Datacentre connected. For use with km8 modular jacks; lsa-plus connection and disconnection modules and lsa-profil modules and overvoltage protection magazines.Features include a cutting inhibitor clip, extraction hook and blade, and a sensor to detect full insertion of the conductor into the contact before cutting surplus wire. Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page.