The Dunlop valve, also known as a Woods is a variation of pneumatic valve that is rarely used on modern bikes. However they were once popular. They look like a cross between the two valves, with a wider lower section, like the Schrader, then a collar and a narrow top section, like the Presta. As the rim drilling is the same for both Woods and Schrader, it is easy to replace the older tubes with the more modern variety. How can I choose the right valve length? Valve extenders screw onto the top of the Presta valve. Some are just hollow tubes, others include a valve at the top, which means that you need to remove the valve core from your inner tube before screwing on the extender.

The former are simpler to use, but add a dead space above the valve, making inflation harder, while with the latter you need to make sure that there’s a fully airtight seal to the inner tube’s valve stem, or your tube will leak air. If you find an item at a lower price with another commercial internet retailer, you will receive it from us at the same price, provided the conditions listed in the link are met. If your wheels are even deeper than the longest valve you can find, you can buy valve extenders to add length to your valve. There’s a range of lengths available: Zipp for example makes extenders from 27mm up to 98mm long. As well as coming in pretty colours, latex inner tubes offer lower weight and rolling resistance than butyl inner tubes. They’re relatively expensive though and heat build-up can cause issues if you’re using rim brakes on long descents. Simon Bromley/Immediate Media Butyl rubber is the industry standard for common replacement inner tubes, offering a relatively cheap and readily available replacement product. Butyl is strong and resistant, and there are lightweight versions for those looking for weight savings - the Specialized Turbo range and Continental Supersonic tubes are popular versions. What are the differences between Latex and Butyl rubber tubes?Bigger tyres naturally require bigger inner tubes. On the left is a 700×32-47C inner tube, while the right is a 700×18-28C. Simon Bromley/Immediate Media If you have carbon rims on a bike with rim brakes, you also need to be careful not to drag your brakes on long descents because overheating can cause latex tubes to fail. Some wheel makers recommend against using latex tubes with their rims. The granting of a best price is not combinable with other promotions (e.g. "free articles) from Bike-Discount. The following sizes are common for mountain bike tyres, regardless of whether your bike has 26in, 27.5in (650b) or 29in wheels. Inner tubes are normally made of butyl rubber or Latex, they sit inside your tyre and are inflated with a pump, they sometimes puncture but are easily replaced. Inner tubes are simple but essential – unless you’re riding with tubeless tyres, you’ll always need an inner tube. Carrying spares is always a good idea, even if you are running tubeless, as a large slash or hole will not seal easily.

Chain reaction Cycles and CRC are trading names of Wiggle Ltd (In Administration) registered in the United Kingdom at 1000 Lakeside, Suite 310, Third Floor N E Wing, Portsmouth, Hampshire, PO6 3EN, There are many different types of inner tube available so it is important that you get the right tube for your bike and to suit the riding that you are doing. How would I choose the best inner tube for my tyres?

Inner Tubes

For even more weight saving, latex tubes are significantly lighter than butyl tubes, plus there’s less friction against the tyre, resulting in lower rolling resistance. Home> Buying Guide: Inner Tubes Our Guide to Buying: Inner Tubes What are Cycling Inner Tubes? In a nutshell Valve extenders come in a range of sizes, types and even colours. These ones simply screw over the top of an open Presta valve, but you can also get ones that allow you to place the valve core at the top. Simon Bromley/Immediate Media On bikes, Schrader valves tend to be used on lower pressure tyres, such as kids's bikes and mountain bikes. These are the same valves used on all motor vehicle tyres and are often referred to as ‘car type’ valves. Schrader valves have a core that is sprung loaded, and the central pin can be depressed with a narrow object to release air from the tube. The spring mechanism keeps the valve closed.

On the other hand, they’re much more fragile and more awkward to fit as they’re floppier than butyl tubes. You must make sure you replace your inner tubes with a tube that is the right size according to the diameter and width for your tyre. The size is almost always written somewhere on the sidewall of the tyre. Inner tubes typically state a wheel diameter and width range for which they will work, e.g. 26 x 1.95-2.125", indicating that the tube is intended to fit a 26 inch tyre with a width of between 1.95 inches and 2.125 inches. There is some overlap in sizes between 650b gravel and mountain bike tyres, but gravel tyres are usually sold in metric sizes as listed above. Cycle Centre Congleton Limited 2021. Cyclestore is a trading name of Cycle Centre Congleton Limited. All Rights Reserved Company No. 05107467 | VAT No: 593 733 507 Finance is subject to application, financial circumstances and borrowing history. Performance Cycling Limited FRN: 720557 trading as Tredz are authorised and regulated by the Financial Conduct Authority. We are a credit broker not a lender – credit is subject to status and affordability and is provided by Mitsubishi HC Capital UK PLC. Terms & Conditions Apply.

700 - 20 Inner Tubes