More weight. Even though they are plastic and don’t weigh that much, some cyclists want to strip their bike of every unnecessary thing they can cause extra weight. If a spoke protector breaks or detaches from the spokes, it can make the cassette or freewheel jam. This can result in irregular behavior of the rear derailleur and chain. A chainwhip, a cassette remover & a wrench is needed to remove the bolt that holds the cassette in place and then you can easily take off protector. And since ignorance and neglect raise the chances of malfunction, manufacturers install spoke and rear derailleur guards on their more genetic machines. The most likely buyers of basic bicycles are beginners who don’t have the necessary knowledge and skills to maintain their machines efficiently.

Just 1 time of your chain getting lodged in there, and depending on how fast you are pedaling, could significantly damage the spokes. The main reason bikes have a spoke guard is to keep the chain from getting into the spokes. All the same, it comes with a few additional benefits. Highlands AB36-38, AB55-56, FK17-21, IV1-19, IV52-54, IV63, KW1-14, PA21-40, PH19-26, PH30-41, PH49-50 In a similar situation, a spoke guard would protect the spokes by acting as a shield. “A rhythmic sound is coming from my rear wheel when climbing steep hills. Why? It can also cause damage to other parts of the rear end of the bike. It can damage the derailleur, the derailleur hanger, the chain guide, the cassette, and even the rim or the frame of the bike itself. It could, in short, be a catastrophic accident. Spokes themselves, or chains, might not be too expensive to replace, but some of the other parts that could be damaged are much more expensive. The dork disc is designed to prevent such accidents from happening. Should I Take Off My Dork Disc?

\n\t\t\tHalfords Essentials Wheel Spoke Reflectors Extra Info

As mentioned in the introduction, the work of the spoke protector is mainly to prevent the chain from reaching the spokes. Mostly, if the derailleur is not well set, it pulls the chain laterally. When the misalignment is significant, it could lead to the chain dropping.

Keeping your bike maintained is a big key to this. Making sure the bike chain is lubed and tight, making sure all of the bolts are secure, and all of the parts are replaced if worn, all contribute to having less risk of an accident.Adding washers to spoke nipples can help distribute stress and maintain the integrity of the rim hole. By placing a washer, the stress from turning the nipple at high tension is primarily directed at the washer rather than the rim hole. Additionally, greasing the washers on both sides makes it easier to turn the nipple and reduces stress on the washer, nipple, and spoke hole. 4. What are bike spoke beads for?

Since accidents do happen without notice, it is better to leave the guard in place. It may take time before you see the spoke protector at work, but when time comes, you will be glad you had it on. Frequently Asked Questions Is a dork disc necessary? The weight of a spoke protector isn’t that high, but it’s still worth mentioning that the metal models tend to be heavier than the plastic version even with all the holes drilled in them. It is designed to stop the chain from getting thrown into the spokes of the rear wheel if it comes off the largest cog on the drive train, which could lead to the chain damaging the spokes. It’s important to note that when shopping for Cassettes products, it can be tempting to go for the lowest price possible, but be wary of retailers that offer prices that seem too good to be true. Some less reputable retailers may sell counterfeit or low-quality Shimano Rear Wheel Spoke Protector, which can be dangerous and not perform as well as the genuine product. Choosing a reputable retailer like Chain Reaction Cycles can help ensure that you’re getting a high-quality product at a competitive price. If you are an experienced rider or someone who regularly cleans and maintains their bike, you can remove the spoke protector if you would like.

Order the spoke protectors at your Van Raam dealer

It’s a spacer designed to convert a 10-speed cassette into a 7-speed “downhill-specific” cassette. The spacer takes up the place of the last three gears and also acts as a spoke protector. If the derailleur is out of position, it will pull the chain laterally. If the misalignment is large enough, it could result in an involuntary shift to a different gear – a phenomenon known as gear slipping. Quality Shimano Rear Wheel Spoke Protector will last much longer and perform better than their cheaper counterparts. They are typically made with higher quality materials and are designed to withstand the wear and tear that comes with regular use. Investing in a high-quality Shimano Rear Wheel Spoke Protector means that you won’t have to replace it as frequently, saving you money. Other riders think that, while it is perhaps not necessary, it doesn’t particularly hurt to have that extra bit of safety on the trail for your spokes.

The bounce could be big enough for the chain to go off the cog. You never want this to happen when you don’t have the spoke guard on.

Discover our range of products

If you have gears on your bike, shifting incorrectly could cause the chain to slip. You want to make sure that your bike is in the right gear before jumping off a ramp or any other obstacle. Modern spoke protectors have been degraded to cheap plastics, but that hasn’t always been the case. Prevents your chainset, wheel and frame from being scratched or scraped by the cassette when it shifts on rough terrain. Also, many cyclists take great pride in being “hardcore” and stay away from products associated with beginners “who don’t know what they’re doing”. 2. Extra weight Therefore, it’s wise to inspect the spoke protector occasionally to see if it’s strongly connected to the spokes.