Connect your notebook, tablet or smartphone to additional monitors and your favourite hardware via a single USB-C or USB-A port (cable included) Not all devices/systems with USB-C interface support the full standard functionality. Please ensure that your USB-C device supports DP alt mode and USB Power Delivery. Universal 100 W USB-C power adapter for powering laptops, tablets, smartphones and other devices equipped with a USB-C charging port Question: When I close the lid of my laptop, the laptop shuts down. Is there any way to prevent this?

Question: I have a laptop with a Thunderbolt 3 or USB-C port, but the laptop does not charge anyway. The station features VESA support, allowing smart vertical installation behind a VESA compatible monitor Compatible with USB-C and Thunderbolt laptops & tablets. (The host device must support DisplayPort Alt mode). Answer: The Ethernet connection must be supported directly by the tablet manufacturer. You can easily verify the support in the set-up “Network Connections”–“Other Networks”– and the option “Ethernet” must be located here.Therefore, a passive (unpowered) cable/adapter cannot be used under any circumstances. Passive cables/adapters can only convert the DisplayPort signal to HDMI. A: Unfortunately, it is not possible to select the monitor that will play the sound in software. At the moment, the only option is to turn it off directly in the monitor settings.

Question: I have a ChromeOS laptop with two external 4K monitors, is there any way to set fullHD resolution on both monitors? Do you like working on a larger monitor? If so, then this station can allow you to connect to up to two external monitors or TVs with up to 2K resolution! And of course, you can enjoy truly smooth video thanks to high refresh rate of 60 Hz.Pytanie: Używam stacji dokującej w moim biurze/firmie i kiedy podłączam kabel Ethernet do stacji dokującej, nie jest możliwe połączenie z internetem/siecią lokalną. Ale kiedy podłączam ten kabel do złącza LAN w moim laptopie, wszystko działa poprawnie. macOS does not support Multi Stream Transport (MST) technology, meaning that when connected to a device running macOS, all connected monitors will display the same image. In case of connecting via DisplayPort your cable supports 4K 60Hz. This is supported only by the DP cables version 1.2 and later. Also, be sure that in the settings of your monitor is selected the setting DP 1.2. In case you don’t know where to find it please refer to the manual for your monitor.

Question: When I close the lid of my laptop, the laptop shuts down. Is there anything I can do to prevent this? O: Jest to możliwe, ale i-tec Technologies nie może zapewnić wsparcia technicznego w tym przypadku, ponieważ jest to technologia producenta monitora. Question : I have a notebook with a Thunderbolt 3 port; despite of it, the notebook is not recharged.A: If you are experiencing this phenomenon, you may just have the monitor refresh rate set incorrectly. For example, if your refresh rate is set to 59 Hz, please set it to 60 Hz and vice versa. Provides up to 100W Power Delivery for compatible USB-C and Thunderbolt laptops & tablets. The host device must support USB-C Power Delivery.

Answer: Unfortunately, it is not possible to select a monitor to play the sound. At this time, the only option is to turn it off directly in the monitor settings. Dlatego w żadnym wypadku nie można używać pasywnego (niezasilanego) kabla/adaptera. Pasywne kable/adaptery mogą jedynie konwertować sygnały DisplayPort na HDMI.Answer: No. A port which complies to the HDMI 1.4 (when using USB-C Alt. Mode) at 3840×2160 resolution can reach maximum 30 Hz. At a resolution of 2560×1440 and below, you can set 60 Hz. A: Verify all cabling between the PC/NB and the active element and tighten the RJ-45 connectors. It also helps to replace the Ethernet cable between the adapter and the active network element (hub, switch, router) with a certified one. Setting a specific value (instead of Auto Negotiation) in the properties of the network adapters, the Speed & Duplex item may also be a solution. The unit is equipped with four graphics outputs, 2x HDMI, and 2x DisplayPort, although a maximum of two monitors can be supported simultaneously. Connect two monitors simultaneously and enjoy the higher 4096 x 2160 resolution @ 60 Hz, using any interface configuration (DP + DP, DP + HDMI, HDMI + HDMI). 5K resolution (5120 x 2880 @ 60 Hz)* is supported when a single monitor is connected via two DisplayPort cables. A: In this case it is a problem with an underpowered CPU. In most cases, ChromeOS laptops use less powerful processors and the DisplayLink software uses the CPU exclusively for calculations.