An eaves protection system prevents the roofing felt from sagging and water from pooling, which can cause rot within the roof timbers. If you would like this protection for your property, get a free, no-obligation quote today. Do gutter companies replace fascia? surface. While Cover Board tends to be thinner as it is not acting alone as part of the structure, the main difference is that Leave 4mm expansion/contraction gap at each board end and cover using matching joint and corner mouldings. Simple face fixed trims can be fixed with low modulus silicone.

To join please select the appropriate fascia joints depending on your profile, and leave a minimum of 10mm expansion gap between joints. uPVC is the most used material for fascia boards and with good reason; it requires virtually no upkeep and is designed to resist warping, peeling and discolouration even after extensive weather exposure. Our upvc soffit board range includes general purpose boards, hollow soffit boards and pre-vented soffits so whatever finish you want to achieve we can help. All my street had theyre roofs set out in the same manner, but some who have had UPVC fitted have had better results than others (astheticaly speaking). Its dark now but the main differance seems to be with the soffits and bargeboard ends ( box ends? ). UPVC Barge boards and fascia boards are exactly the same in material and profile. However, the difference is that fascia boards run horizontally along the length of the bottom of the roof, whereas barge boards runThat fixed fascia also has to take the weight of the tiles and the guttering, but not so when fixing the cappit to the existing timber fascia, as the weight is still taken by the timber.

The fascia board is the long, straight board mounted at the point where the roof and outer walls intersect, commonly referred to as the roof-line. Fascia boards are usually fixed on the lower ends and edges of the roof. Fascia boards offer support to the lower edge of the bottom row of tiles and carry all guttering. Q: What is the purpose of roof flashing? A: Roof flashing is used to prevent water from seeping into vulnerable areas of your roof, such as valleys, chimneys, and vents.

Looking for replacement fascias boards, barge boards and more?

Soffit bearers must be provided at max 600mm intervals (400mm for foiled and coloured soffits). A preferred method is to secure battens between the rafter foot and the wall, fixed securely at both ends and supported between these points as appropriate. Roof flashing plays a pivotal role in preventing water infiltration at vulnerable points in your roof. Here's what you need to know: Understanding Roof Flashing Rafters must be at maximum 600mm centres. Note: centres not exceeding 400mm are required for foiled and coloured profiles. Barge boards are the diagonal panels that are affixed to the roof gable and run upwards to create the apex of the roof. They serve both a decorative and functional purpose; they are used to cover and protect any exposed material from the roof. Traditionally, barge boards were manufactured using wood – however, the modern alternative of uPVC is far more low maintenance and requires less replacement over the years. How to fit barge boards

Firstly and most importantly, please ensure all Health & Safety guidelines are followed – we don’t want you having an accident whilst replacing your fascias and soffits.

Fascias and Soffits

Both barge boards and fascia boards serve important functional and decorative purposes; not only do they make the roofline look good, but they are also important for the structure of the roof and protect the roofing materials behind. What is the standard size for a barge board? Fasc ias run horizontally along the roofline and can be made from either plastic or wooden boards. The purpose of the fascia is to cover fittings and ensure that they are waterproof and protected. Fascias also help to secure the last row of roof tiles,keeping them securely in place while looking good doing it. Available in a variety of patterns and colours so you can match them to the style of the building. Choosing the right fascia In the unlikely event of a late delivery, we will be unable to compensate you for any consequential loss, so please do not organise any plant or labour before you have received your materials.

Fascia Board has a recess along the inner corner to locate the Soffit whereas the inner corner of Cover Board is a plain right-angle. The new fascia should be pushed up under the ends of the tiles and levelled before fixing, it's easier to get the fascia straight I am going to have to remove a metre of material on the fascia and bargeboard at all points to remove existing rot, so it would'nt be a hardship to do that and then clad. Cost and asthetics will be the deciding factor. If the existing soffit is to be retained and requires new roof space ventilation, drill 70mm diameter holes and fix circular soffit ventilators at required centres. Bunnings downpipes play a vital role in managing rainwater runoff from your roof. Proper installation and maintenance are crucial to protect your property from water damage. Selecting the Right Bunnings Downpipesmentioned above, to do the job properly, the original timber fascia, soffit and bargeboard should be removed before fitting replacements. These three features can be found at the edge of the roof, in particular where the top of the exterior wall meets the roof. Primarily used to improve the aesthetics of a roof, these features also help protect the roof and wall from the elements. Knowing where they are is one thing, of course, but what exactly are they? What are Bargeboards? If you are installing your new PVC fascia and soffit onto either a pitched or flat roof, be aware that there are specific installation instructions that you should consider. This guide also provides extra detail to ensure your installation goes smoothly and seamlessly.