ARCELI Mega 2560 Pro Mini Built-in, MCU ATmega2560, USB CH340G Electronics

Product Information

This provides the RC network for improved reset, exposes analogue inputs A0 to A5 and a 10-Way DIL connector for pins D2 to D9. The board has a Micro USB connector that allows you to connect the microcontroller to the computer via the USB-UART adapter CH340(A driver installation may be required).

Digital pins 0 to 13 (and the adjacent AREF and GND pins), analog inputs 0 to 5, the power header, and ICSP header are all in equivalent locations. This is a small form factor of Arduino Mega2560 and it also has onboard USB port so you can load code directly using Arduino IDE. The Mega 2560 has a resettable polyfuse that protects your computer's USB ports from shorts and overcurrent. A properly configured shield can read the IOREF pin voltage and select the appropriate power source or enable voltage translators on the outputs for working with the 5V or 3. The first of these 10-Way DIL connector will be replaced, to directly expose the Smartisant 8-channel IO Board IO1 functionality.The use of a fairly high power dc-dc converter means that a lot of other sensors, devices and peripherals can be powered from the one power supply. The RX and TX LEDs on the board will flash when data is being transmitted via the ATmega8U2/ATmega16U2 chip and USB connection to the computer (but not for serial communication on pins 0 and 1). Check the Arduino Forum for questions about the Arduino Language, or how to make your own Projects with Arduino. The Arduino Software (IDE) uses this capability to allow you to upload code by simply pressing the upload button in the Arduino environment.

The Micro Hut will not be liable to you under any circumstances for any direct, indirect, consequential or special damages arising from your use of purchased products or its services.This bypasses the on-board regulators and and should only be used if a stable 5V power source is available.