The various additives in JLM Diesel Intake Extreme Clean are resistant to high temperatures, as a result of which, they endure the combustion cycle in the cylinder and are actually effective in the turbo and exhaust system. Thanks to the operation in this ‘follow-up trajectory’ of the combustion, the channels and valves for exhaust gas recirculation (EGR) are cleaned as well. Top technicians are genuine fans of JLM products including DPF Doctors Chay Blyth of Autotech Fife and Barry Lawson of Ewan Lawson Motors: “We have used JLM Lubricants’ products since we opened in July 2020. I am pleased to report that we have never been let down by the quality.” – Chay JLM je stabilná značka s chuťou rásť, ktorá je postavená na troch pilieroch: kvalita, služby a inovácia.

We then moved to the easy part, cleaning the DPF! Our tool of choice was the JLM DPF Cleaning Tool Kit used with the JLM Clean & Flush. We used this because it effectively cleans the soot from the DPF in-situ at low temperature. Another avenue businesses are going down to cut costs is the use of green parts. Green parts are made up of undamaged and reusable parts from end-of-life and written-off vehicles, which does bring costs down. But they can cause issues once installed. This is highlighted by the fact that the part might have an electric module in it that is programmed for a specific vehicle or chassis. This means that if it is installed on a new vehicle, there is the possibility it may stop the vehicle from starting and it can also be difficult to code, which adds time to the overall job. Nozzles of modern diesel engines have extremely small spray hole diameters. Inside and around the spray holes, deposits may form and reduce the amount of injected fuel or disturb the spray pattern. This causes power loss of the engine and higher fuel consumption. In addition, it results in incomplete combustion causing higher emissions and even more deposit formation.Using JLM Petrol Extreme Clean couldn’t be easier. Follow these simple steps and maintain optimum reliability.

JLM Diesel Extreme Clean combines the advantages of all individual diesel additives and can be used in all old and new cars with a diesel particulate filter. How to use JLM Extreme Clean JLM Lubricants is an innovator in the field of fuel additives with a global reach. In the UK, JLM products have been adopted by many leading specialist technicians, including the DPF Doctor network, founded by Darren Darling. yet delivers the same results and it enables the independent workshop to keep DPF business in-house. The JLM Diesel Intake Extreme Cleaning Toolkit uses a similar technique to clean the engine, including the air intake, turbo, EGR and injectors – gently and effectively without the need to invest in floor-based equipment. Find out more about why you should be using JLM Petrol Extreme Clean. Why use JLM Petrol Extreme Clean Wynn’s Petrol EGR Cleaner is an aerosol product developed for cleaning the air intake system of all petrol engines. It cleans the air intake system, air flow sensor, inlet valves and EGR valve which increases engine performance, fuel consumption and lowers vehicle emissions.Dedicated concentrate for Heavy Duty Vehicles. For all diesel engines with or without turbochargers running on low or normal sulphur level diesel fuel and biofuel B7, B10 and B20. We used a JLM engine oil flush and added a can of JLM Diesel Extreme Clean to the fuel tank so the engine would run as efficiently as possible after the repair. Discover how JLM Extreme Clean diesel additive cleaner can help you: Why you should use JLM Extreme Clean

When asked if he had seen an increase in diesel problems since the MOT rule changes in May, here’s what Darren said: Diesel Extreme Clean HD is a very effective cleaner for both internal (IDID) and external diesel injector deposits (EDID). Diesel engines are still undergoing major development. Diesel engines are even said to be needed to achieve climate goals. The number of diesel engines in passenger cars is therefore expected to remain at least the same in the coming years, or even increase. Light commercial vehicles will also be equipped with diesel engines for decades to come. JLM Diesel air intake cleaner & EGR cleaner provides strong cleaning ability and can restore engine performance. It removes stubborn dirt including rust deposits from the air intake and exhaust gas recirculation system and can remedy irregular idling and engine stalls.DPF in under two hours without having to remove it from the vehicle. The toolkit costs a fraction of floor-based units First, the active components in JLM Diesel Extreme Clean efficiently remove the soot deposits from the parts of the fuel system and the engine. After cleaning, the parts are now lubricated and protected against oxidation and other deposits that could affect engine performance.