Produced in China by our reliable domestic manufacturers and through our verification and sales channels to ensure product quality and safety. Lithium-ion batteries require circuitry to monitor the battery temperature during charging. The battery chemistry is subject to thermal runaway in failure cases. Such a failure is suspected to be the cause of the fire in the dive boat that killed 34 people in their sleep a couple of years ago.

I'd love if they can be charged by USB or provide a USB out so i don't need to carry mobile charger and this The battery indicators in cameras are based on actual voltage of the battery. However, since the Fuji batteries have quite a different voltage curve, compared to all the aftermarket batteries, the remaining capacity shown by the camera isn’t accurate for non-Fuji batteries. This is mostly apparent on almost empty batteries — while the camera shows that the battery is still OK, it can actually be almost empty.

MHz (11 channels) in the case of the X-T3 WW. EF‑X8 shoe-mounted flash unit (not included with the X-T3 WW) Guide number In Europe, there are very good Patona Platinum, Patona Premium and ExPro White. All of them offer >90% capacity of the original batteries and also they don’t seem to produce significantly more heat even after some heavy use. Compatibility: FUJIFILM X-Pro2 / X-Pro1 / X-T2 / X-T1 / X-T10 / X-E2S / X-E2 / X-E1 / X-M1 / X-A3 / X-A2 / X-A1 / X-A10 / X100F / FinePix HS50EXR / HS30EXR / HS33EXR

It makes more sense to me that Fuji would have designed both of the Generation 3 cameras to take full advantage of the new battery they were developing, but that the battery might not have been ready for the X-Pro2 release.My old original NP-W126 currently, after several years of usage, has roughly 1100 mAh, while it had >1200 mAh when new. Lower quality batteries can show more significant aging, the DSTE battery is already almost unusable. Conclusion Suitable for models including the Fuji X-T2, X-Pro2, X-T10, X-E2S, X-A2, HS50EXR, HS33EXR and HS30EXR digital camera models. The frame rate and number of frames per burst varies with shooting conditions and type of memory card used.

If you want the ultimate performance or you do a lot of 4K video recording or continuous shooting, NP-W126S is clearly the winner. That said, some of the third party batteries are very close to the Fujifilm’s original in performance, while they cost only a fraction of the price.Autofocus system: Intelligent hybrid AF (TTL contrast-detect/phase-detection AF) with AF-assist illuminator The FX1 charger will report the correct temperature of a thermistor equipped battery, but it does not terminate charging if the battery goes outside the 0°C to 45°C allowable charging temperature range. The user needs to stop the charging process if they notice that the temperature display is approaching the 45°C charge temperature limit." Can I charge NP-W126S of the X-T30 with the charger of X-T1 (BC-W126) or do I have to buy a BC-W126S ? All the batteries lose their performance with time and usage. Their capacity decreases and the internal resistance increases. Don’t expect the very same performance from few years old batteries as you get from the new ones. fujirumors.com– JJC is offering a practical (and cheap) dual USB battery charger for Fujifilm NP-W126/S batteries