Given the battery's maximum draw of 9A, the secondary add-on fuse tap should be rated at 10A or above.

Save money and eliminate any chance of picking the wrong type of fuse taps with our new Fuse Tap Bundle. Simply remove an existing fuse from the fuse box, insert that fuse in to the bottom slot of the fuse tap.Our full range of services enables us, to offer you, comprehensive and professional support for any type of vehicle, no matter what service you require.

If you put it in back-to-front then the power is coming in from the right terminal, through 1 fuse, through a 2nd fuse before it can go out to the additional accessory.Does anyone know if the fuse tap should should be aiming downwards (picture 1) or upwards (picture 2).

Your credit rating may be affected which will make it more difficult or more expensive for you to obtain credit in the future. Speaking of proper ratings, it's crucial to understand that modern batteries, exemplified by our top-tier BlackboxMyCar PowerCell 8, operate in high and low charging modes, capable of drawing up to 9A of power on high.

And also to confirm which fuses have constant power, and which ones are switched with the ignition).

Also known as ' add-a-circuits', fuse taps allow for non-invasive installation of a dash cam or almost any other electrical accessory into your vehicle. These fuse taps can be used to help you quickly, easily and safely integrate just about any 12v electrical accessory with your vehicle's electrical system at the fuse box. On the positive side, it simplifies to a 2-wire connection, requiring only accessory and ground connections. To hardwire your Viofo Dash Camera, you will need to remove one of the fuses from the fuse box and replace it a Viofo Fuse Tap.

The new circuit comes with its own fuse, so your device and vehicle are safe from any potential shorts or other problems. For Power Magic Ultra Battery, use the included fuse taps as they include fuses adapted to the Ultra Battery’s power draw.